Product Description
Product Description
800kg electric hydraulic knuckle boom pickup crane truck mounted 3.8m lift 200kg CE
|
Item |
Unit |
HY08z4 |
|
Max.Lifting Moment |
Ton . M |
6.6 |
|
Max.Working Radius |
M |
3.6 |
|
Max.Working High |
M |
5.2 |
|
Slewing Angle |
. |
330 |
|
Installation Space |
Mm |
320 |
|
Outrigger Span |
Mm |
900 |
|
Crane Self Weight |
Kg |
160 |
Our Advantages
HangZhou Haoyi Construction Machinery Technology Co.,ltd, was established in 2571 and is located at No.16 Xihu (West Lake) Dis. Road,
HangZhou High-tech Development Zone. It mainly produces truck-mounted cranes, hydraulic cranes,aerial work vehicles,
and other customized mechanical products. HaoYi has developed series of control system for truck mounted crane, aerial
lift fire vehicle, aerial work platform truck, rescue crane, high pressure aerial water jet fire vehicle, marine crane and other
products. Providing a variety of solutions to our valued customers. All above products have been widely applied in logistic,
fire fight equipment, railway track, petrochemical industry, engineering machinery, ship building, municipal public works,
park maintenance and other fields.
A. Materials:
Structural parts and hinge shafts: Our structural parts are all made of high-strength plates, such as key stress-bearing parts, are made of 70KG/80KG, or even 90kg high-strength steel plates (HG60, BS900), and the hinge shafts of key parts are all made of high-strength steel plates. 40Cr, or 42CrMo tempered and quenched. Advantages: high strength, strong bearing capacity, longer service life:
Oil red: Our hydraulic cylinders all adopt domestically well-combined seals, and we use main road seals, the outermost layer is a dust-proof ring, the inside is a support pad, and then a seal ring, and the product is guaranteed through multiple seals. Quality, advantages: long service life, not easy to aging, very low oil leakage rate
Pipeline: CZPT standard high-pressure pipe is used. The joint adopts a 24° cone, ferrule and screw fit, not a commonly used O-ring. After the ferrule nut is installed, there will never be oil leakage, and the O-ring The ring is easy to age, advantages: stronger high pressure resistance and more durable;
Operation and safety valves: all adopt domestic famous brands, the valve cores are all imported, and the valve blocks are all domestically produced. Advantages: both quality and price, low oil leakage rate.
Oil pump: HangZhou Saiyuan gear pump used below 6.3 tons, plunger pump from HangZhou High Pressure Oil Pump Factory for folding arm and above 8 tons. Advantages: large speed range, reliable operation, long service life and convenient maintenance.
Slewing mechanism: powerful slewing, capable of 360° continuous rotation, advantages: easy operation, long life:
Hydraulic lifting mechanism: hydraulic winch, powerful hoisting, low noise, safe and reliable, fast lifting speed, advantages: long life, high efficiency:
Steel wire rope: multi-strand thin wire anti-rotation steel wire rope, advantages: high strength, good flexibility, no winding, high safety, safe and durable:
B. Process:
Automatic boom welding, good workmanship, good weld quality, good weld shape, less weld joints, no false welding, false welding, much better than manual welding, no pores, trachoma, cracks, unfused and other defects . Advantages: beautiful appearance, good weld quality.
Longer boom life:
The high-strength plate is pre-treated before welding to reduce welding stress, reduce post-weld deformation, and ensure the overall straightness of the long boom.
Polygonal boom: below 6 and 3 tons are pentagonal, and above 8 tons are similar to U-shaped booms: Advantages: good bending and torsion resistance, large bearing capacity, reducing self-weight and increasing boom strength:
The advantages of the polygonal turntable column: good bending and torsion resistance, large bearing capacity, reducing self-weight and increasing structural strength:
Sandblasting and shot blasting treatment after welding, benefits: rust removal (knock off the oxide skin on the surface), eliminate welding stress, form pitting on the surface (0.1-0.2mm dents), and improve the adhesion of the paint surface.
After Sales Service
1 year after sale, if there is a problem within 1 year,free spares
FAQ
1) How many years of your factory?
We have 12 years production and nearly 10 years experience, we exported to more than 50 countries & regions.And we are a manufacturer specialized in truck crane,pickup crane,aerial platform truck,marine crane.
2) Which kind of payment you can be accepted?
Normally both of T/T & L/C at sight are ok for us.Alibaba trade assurance,credit card,western union.
3) How about the delivery time?
20-40 working days after received 30% T/T or L/C.70% balance payment before shipping.
4) What’s your warranty?
Normally is 1 year, if large quantities we can negotiate.We will mail the accessories to you for free if have problems within 1 year.
5) What’s your MOQ?
MOQ: 1 set
6) Can you accept OEM service?
Yes for sure my friend.We provide logo,package,customized,and also can customized the product according to your requirements.
7) Optional Attachment?
Remote Control, Basket, Auger, Grapple, Top Seat, Rear Legs
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| After-sales Service: | 1 Year After Sale |
|---|---|
| Warranty: | 1 Year After Sale |
| Certification: | CE, ISO9001 |
| Samples: |
US$ 2400/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by CX 2023-05-22