Materials Dealing with Energy UNIT two
This electrical power unit attributes electrical power up gravity down circuit. Activate the start solenoid to start the motor to lift the machine. The lowing movement is activated by the solenoid valve together with the lowering speed managed from the stress compensated movement handle valve. Solutions of this series can be widely utilized in the sector of logistic products like fork lift, mini lift table, and so forth.
one. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned just before mounting the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which must also be clean and free of impurities, N46 hydraulic oil is proposed .
4. Oil shifting is required just after the preliminary 100 operation hours,afterwards as soon as every single 3000 hours.
five. The energy unit needs to be mounted horizontally.
Material Dealing with Energy UNIT 1
This electrical power unit is created for your fork lift industry, consisting of really effective gear pump, DC motor, guide raise and reduce valve, tank, ect. The up and down movement are controlled by the lever of the guide release valve, which can be equipped with an electric switch to activate the motor. The lowing pace is managed through the stress compensated movement management valve.
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned prior to installation of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which really should also be clean and totally free of impurities, N46 hydraulic oil is recommended .
four. Oil modifying is needed soon after the first a hundred operation hours, afterwards as soon as each and every 3000 hours.
5. The power unit proven is intended to be mounted horizontally.